Track Lights

Track lights on light rail vehicles (LRVs) illuminate the tracks directly in front.

We offer:

  • Ruggedized polycarbonate lens (NFPA 130 compliant for flame, smoke, and toxicity requirements) which stands up to harsh traffic environments and daily car washes
  • An internal LED mounting angle incorporated to eliminate blinding of oncoming drivers or pedestrians
  • Custom sealed designs available
  • A focused tight beam which illuminates tracks and switch points up to 50 feet in front of a light rail vehicle (LRV).
  • Delphi Weather Pack connector as well as other sealed connectors upon request
  • Availability as a drop-in replacement for standard round sealed beam lights
  • Reverse polarity and transient spike protection
  • 100,000-hr minimum continuous operation for an LED system
  • 24-month warranty on LED fixtures

All fixtures as a system meet or exceed these standards:

  • APTA Insulation Integrity Standard SS-E-001-98
  • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
  • NFPA 130:2010 Flame Smoke and Toxicity Standards
Add to Wishlist

send an inquiry for this item

Insert Name
Insert Email
Insert Message

Related Products

  • + Quick View

    Main Lighting Retrofit

    ,

    We offer:

    • A Diffuser Technology lens which quickly snaps into an aluminum base, eliminates hot spots, and can be used behind existing lenses or advertising lenses
    • An aluminum base that is easily installed, provides optimal thermal management, and can be quickly secured to existing fixture back liners
    • 24, 28.5, 37.5 and 74vdc applications which are covered by a 10-95vdc operating range on LED installations.
    • 110 – 240VAC systems in both LED and Fluorescent
    • Reverse polarity and transient spike protection
    • Up to 200,000-hr continuous operation for an LED system, achieved by purposefully under-driving high-efficiency LEDs
    • 10.5 – 18W power consumption on 48” unit depending on T12 or T8 replacement

    All fixtures as a system meet or exceed these safety standards:

    • APTA Normal Lighting Standard RP-E-012-99
    • APTA Emergency Lighting Standard SS-E-013-99 Rev 1
    • APTA RT-S-VIM-020-08 “Standard for Emergency Lighting System Design for Rail Transit Vehicles”
    • EN 13272 Railway Applications – Electrical Lighting for Rolling Stock in Public Transportation Systems
    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards
  • + Quick View

    LED Headlights

    ,

    Long-lasting LED components designed to withstand shock & vibration to provide years of maintenance-free service;
    Designed by JW Speaker

    PAR 56 7″ Round 75V LED Locomotive Headlight/Auxiliary Light
    View Spec Sheet

    PAR 46 5.75″ LED Headlight
    View Spec Sheet

    PAR 56 7″ Round 8700-EV-12/24V Dot Headlamp w/H4 Black
    View Spec Sheet

    4″ x 6″ Rectangular LED 8800 12/24V Dot Hi/Lo LRV Headlamp
    View Spec Sheet

    5″ x 7″ Rectangular LED 8900 12/24V LED Dot Headlamp
    View Spec Sheet

  • + Quick View

    Emergency Lighting

    ,

    Capacitive Storage –

    With over 2000 Railcars and Locomotives in service or on order this APTA-compliant emergency lighting system uses capacitive power storage technology. It adapts easily to new builds or to existing rolling stock retrofits regardless of age.

    We supply:

    • Independent Capacitive Power Storage units which are able to power high-performance LED spotlights for up to 4 hours
    • Ability to achieve full charge after a 15-minute charge period
    • 50,000 – 500,000 mechanical charge cycles (depending on model)
    • Superior replacement technology for traditional NiCad batteries
    • Capacitors rated for 5 – 10 years of functional discharge service life (depending on Model & Environment)
    • Single voltage 28.5, 37.5, 74, 110 vdc, or 120 / 240 vac versions available
    • More than twice the light levels required by APTA throughout the 90-minute emergency interval
    • An emergency lighting task load completely removed from existing car batteries
    • Low-profile spotlights which are available in fixed or fully adjustable versions
    • LED spotlight capability for simpler installation in existing or new fixture lenses
    • Reverse polarity and transient spike protection
    • 200,000-hr minimum continuous operation for an LED system due to purposefully under-driving high-efficiency LEDs
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed any combination of these standards:

    • APTA Normal Lighting Standard RP-E-012-99
    • APTA Emergency Lighting Standard SS-E-013-99 Rev 1
    • APTA Emergency Lighting Design PR-E-S-013-99 Rev.1
    • EN 13272 Railway Applications – Electrical Lighting for Rolling Stock in Public Transportation Systems
    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards
    • FRA 49 CFR Parts 238 and 239 Emergency Lighting
    • APTA RT-S-VIM-020-08 “Standard for Emergency Lighting System Design for Rail Transit Vehicles”
  • + Quick View

    Stairway Lighting

    ,

    Clients may choose not only a single function version, but also a dual version which adds emergency system functionality.

    We offer:

    • Several sizes and styles
    • Available in most DC and AC voltage ranges
    • Ruggedized Polycarbonate Lenses (NFPA 130 compliant) which can be clear, translucent, or diffused
    • A variety of bezel materials (such as aluminum and Kydex) in many colors and finishes
    • Reverse polarity and transient spike protection
    • 100,000-hr minimum continuous operation for an LED system
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed these safety standards:

    • APTA Normal Lighting Standard RP-E-012-99
    • APTA Emergency Lighting Standard SS-E-013-99 Rev 1
    • APTA Insulation Integrity Standard SS-E-001-98
    • 49 CFR Part 38.81
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards