LED Main Lighting for Retrofits
LED Main Lighting for Retrofits
We offer:
- A Diffuser Technology lens which quickly snaps into an aluminum base, eliminates hot spots, and can be used behind existing lenses or advertising lenses
- An aluminum base that is easily installed, provides optimal thermal management, and can be quickly secured to existing fixture back liners
- 24, 28.5, 37.5 and 74vdc applications which are covered by a 10-95vdc operating range on LED installations.
- 110 – 240VAC systems in both LED and Fluorescent
- Reverse polarity and transient spike protection
- Up to 200,000-hr continuous operation for an LED system, achieved by purposefully under-driving high-efficiency LEDs
- 10.5 – 18W power consumption on 48” unit depending on T12 or T8 replacement
All fixtures as a system meet or exceed these safety standards:
- APTA Normal Lighting Standard RP-E-012-99
- APTA Emergency Lighting Standard SS-E-013-99 Rev 1
- APTA RT-S-VIM-020-08 “Standard for Emergency Lighting System Design for Rail Transit Vehicles”
- EN 13272 Railway Applications – Electrical Lighting for Rolling Stock in Public Transportation Systems
- APTA Insulation Integrity Standard SS-E-001-98
- APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
- NFPA 130:2010 Flame Smoke and Toxicity Standards
send an inquiry for this item
Related Products
LED Marker and Break Lights
Exterior, Heavy RailLED fixtures provide superior longevity, light levels, power savings and reliability over traditional incandescent bulbs.
We offer:
- Wide operating ranges provided by superior TDG constant current LED drivers such as 10-45vdc
- Many existing lens shapes and colour options
- Custom designs
- A variety of flange and bezel finishes
- Retrofit mounting bases for when the original bezel is no longer available, or will work with a retrofit installation
- SAE/FMVSS/CMVSS 108 compliance
- Sealed housings and also sealed connector solutions
- Reverse polarity and transient spike protection
- 100,000-hr minimum continuous operation for an LED system
- 24-month warranty on LED fixtures
All fixtures as a system meet or exceed these standards:
- APTA Insulation Integrity Standard SS-E-001-98
- APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
- NFPA 130:2010 Flame Smoke and Toxicity Standards
Emergency Lighting
Heavy Rail, InteriorCapacitive Storage
With over 2000 Railcars and Locomotives in service or on order this APTA-compliant emergency lighting system uses capacitive power storage technology. It adapts easily to new builds or to existing rolling stock retrofits regardless of age.
We supply:
- Independent Capacitive Power Storage units which are able to power high-performance LED spotlights for up to 4 hours
- Ability to achieve full charge after a 15-minute charge period
- 50,000 – 500,000 mechanical charge cycles (depending on model)
- Superior replacement technology for traditional NiCad batteries
- Capacitors rated for 5 – 10 years of functional discharge service life (depending on Model & Environment)
- Single voltage 28.5, 37.5, 74, 110 vdc, or 120 / 240 vac versions available
- More than twice the light levels required by APTA throughout the 90-minute emergency interval
- An emergency lighting task load completely removed from existing car batteries
- Low-profile spotlights which are available in fixed or fully adjustable versions
- LED spotlight capability for simpler installation in existing or new fixture lenses
- Reverse polarity and transient spike protection
- 200,000-hr minimum continuous operation for an LED system due to purposefully under-driving high-efficiency LEDs
- 24-month warranty on LED fixtures
All fixtures as a system meet or exceed any combination of these standards:
- APTA Normal Lighting Standard RP-E-012-99
- APTA Emergency Lighting Standard SS-E-013-99 Rev 1
- APTA Emergency Lighting Design PR-E-S-013-99 Rev.1
- EN 13272 Railway Applications – Electrical Lighting for Rolling Stock in Public Transportation Systems
- APTA Insulation Integrity Standard SS-E-001-98
- APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
- NFPA 130:2010 Flame Smoke and Toxicity Standards
- FRA 49 CFR Parts 238 and 239 Emergency Lighting
- APTA RT-S-VIM-020-08 “Standard for Emergency Lighting System Design for Rail Transit Vehicles”
LED Headlights
Exterior, Heavy RailLong-lasting LED components designed to withstand shock & vibration to provide years of maintenance-free service;
Designed by JW SpeakerPAR 56 7″ Round 75V LED Locomotive Headlight/Auxiliary Light
View Spec SheetPAR 46 5.75″ LED Headlight
View Spec SheetPAR 56 7″ Round 8700-EV-12/24V Dot Headlamp w/H4 Black
View Spec Sheet4″ x 6″ Rectangular LED 8800 12/24V Dot Hi/Lo LRV Headlamp
View Spec Sheet5″ x 7″ Rectangular LED 8900 12/24V LED Dot Headlamp
View Spec SheetADA / Door Indicator Lighting
Heavy Rail, InteriorADA indicator lighting is built with TDG’S LED fixtures to provide superior light levels, power savings and reliability over traditional incandescent bulbs.
We offer:
24, 28.5, 37.5, 72, 110 vdc versions
Tamperproof lens with stainless steel flange
Reverse polarity and transient spike protection
100,000-hr minimum continuous operation for an LED system
24-month warranty on LED fixtures