LED Number Board Lighting

Install new LED fixtures or replace LED inserts easily in existing incandescent or fluorescent enclosures.

We offer:

  • 20-90vdc & 50 – 130vdc operating range from the DC power supply through TDG’s Universal Driver
  • Simple terminal block connections or cable assembly connections
  • Reverse polarity and transient spike protection
  • 100,000-hr minimum continuous operation for an LED system
  • 24-month warranty on LED fixtures

All fixtures as a system meet or exceed these standards:

  • APTA Insulation Integrity Standard SS-E-001-98
  • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
  • NFPA 130:2010 Flame Smoke and Toxicity Standards
Add to Wishlist

send an inquiry for this item

Insert Name
Insert Email
Insert Message

Related Products

  • + Quick View

    CSU LED Emergency Lighting

    ,

    Capacitive Storage –

    With over 2000 Railcars and Locomotives in service or on order this APTA-compliant emergency lighting system uses capacitive power storage technology. It adapts easily to new builds or to existing rolling stock retrofits regardless of age.

    We supply:

    • Independent Capacitive Power Storage units which are able to power high-performance LED spotlights for up to 4 hours
    • Ability to achieve full charge after a 15-minute charge period
    • 50,000 – 500,000 mechanical charge cycles (depending on model)
    • Superior replacement technology for traditional NiCad batteries
    • Capacitors rated for 5 – 10 years of functional discharge service life (depending on Model & Environment)
    • Single voltage 28.5, 37.5, 74, 110 vdc, or 120 / 240 vac versions available
    • More than twice the light levels required by APTA throughout the 90-minute emergency interval
    • An emergency lighting task load completely removed from existing car batteries
    • Low-profile spotlights which are available in fixed or fully adjustable versions
    • LED spotlight capability for simpler installation in existing or new fixture lenses
    • Reverse polarity and transient spike protection
    • 200,000-hr minimum continuous operation for an LED system due to purposefully under-driving high-efficiency LEDs
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed any combination of these standards:

    • APTA Normal Lighting Standard RP-E-012-99
    • APTA Emergency Lighting Standard SS-E-013-99 Rev 1
    • APTA Emergency Lighting Design PR-E-S-013-99 Rev.1
    • EN 13272 Railway Applications – Electrical Lighting for Rolling Stock in Public Transportation Systems
    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards
    • FRA 49 CFR Parts 238 and 239 Emergency Lighting
  • + Quick View

    ADA Indicator

    ,

    ADA indicator lighting is built with TDG’S LED fixtures to provide superior light levels, power savings and reliability over traditional incandescent bulbs.

    We offer:

    • 24, 28.5, 37.5, 72, 110 vdc versions
    • Tamperproof lens with stainless steel flange
    • Reverse polarity and transient spike protection
    • 100,000-hr minimum continuous operation for an LED system
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed these safety standards:

    • APTA Normal Lighting Standard RP-E-012-99
    • APTA Emergency Lighting Standard SS-E-013-99 Rev 1
    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards
  • + Quick View

    HPPL Emergency Pull Ring Housing

    ,

    The high performance photoluminescent (HPPL) material within this emergency pull ring housing is formulated based on the APTA definition of luminescence requirements.

    We supply:

    • Flexibility to be installed in new builds or retrofit applications

    The HPPL in this pull ring housing was formulated to meet or exceed the Section 3.1.13 definition within these standards:

    • APTA Standard for Low Location Exit Pathway Marking SS-PS-004-99 Rev 2, Section 3.1.13
    • APTA Standard for Emergency Egress Access of Passenger Rail Equipment SS-PS-002-98 Rev 3, Section 3.1.13
  • + Quick View

    LED Retrofit Main Lighting

    ,

    We offer:

    • A Diffuser Technology lens which quickly snaps into an aluminum base, eliminates hot spots, and can be used behind existing lenses or advertising lenses
    • An aluminum base that is easily installed, provides optimal thermal management, and can be quickly secured to existing fixture back liners
    • 24, 28.5, 37.5 and 74vdc applications which are covered by a 10-95vdc operating range on LED installations.
    • 110 – 240VAC systems in both LED and Fluorescent
    • Reverse polarity and transient spike protection
    • Up to 200,000-hr continuous operation for an LED system, achieved by purposefully under-driving high-efficiency LEDs
    • 10.5 – 18W power consumption on 48” unit depending on T12 or T8 replacement

    All fixtures as a system meet or exceed these safety standards:

    • APTA Normal Lighting Standard RP-E-012-99
    • APTA Emergency Lighting Standard SS-E-013-99 Rev 1
    • EN 13272 Railway Applications – Electrical Lighting for Rolling Stock in Public Transportation Systems
    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards