LED Retrofit Main Lighting
We offer:
- A Diffuser Technology lens which quickly snaps into an aluminum base, eliminates hot spots, and can be used behind existing lenses or advertising lenses
- An aluminum base that is easily installed, provides optimal thermal management, and can be quickly secured to existing fixture back liners
- 24, 28.5, 37.5 and 74vdc applications which are covered by a 10-95vdc operating range on LED installations.
- 110 – 240VAC systems in both LED and Fluorescent
- Reverse polarity and transient spike protection
- Up to 200,000-hr continuous operation for an LED system, achieved by purposefully under-driving high-efficiency LEDs
- 10.5 – 18W power consumption on 48” unit depending on T12 or T8 replacement
All fixtures as a system meet or exceed these safety standards:
- APTA Normal Lighting Standard RP-E-012-99
- APTA Emergency Lighting Standard SS-E-013-99 Rev 1
- EN 13272 Railway Applications – Electrical Lighting for Rolling Stock in Public Transportation Systems
- APTA Insulation Integrity Standard SS-E-001-98
- APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
- NFPA 130:2010 Flame Smoke and Toxicity Standards
Product added! Browse Wishlist
The product is already in the wishlist! Browse Wishlist
send an inquiry for this item
Related Products
Active LED LLEPM Flooring System
Commuter Rail, InteriorThis active LED low location exit pathway marking (LLEPM) flooring system is fully repairable. Also available in an Active / Passive Hybrid System.
We supply:
- Rigid polycarbonate system with LED light source
- A scuff-resistant surface
- Mounting within a polycarbonate-
or aluminum-based track designed to run the length of the railcar - 24-month warranty
The flooring system meets or exceeds these standards:
- APTA Standard for Low Location Exit Pathway Marking SS-PS-004-99 Rev 2, Section 6.1 “Electrically (Active) Powered Systems”
- NFPA 130:2010 Flame Smoke and Toxicity Standards for Rail
Lighting Control Systems
Commuter Rail, Interior- Available in 28.5VDC, 37.5VDC, 76VDC, 110VDC, and 120VAC (Custom Voltages Availables)
- Firmware controlled lighting control
- Can operate emergency lighting, dimming control, occupancy, color change, etc
- Optional battery unit fully compliant with FRA 49 CFR Parts 238 and 239, APTA PR-E-S-013-99, Rev. 1, and APTA RT-VIM-S-020-10
- Optional Ethernet or customized interface to control lighting levels/color across train set.
- Option Wireless CommunicationAll Control Units can be designed as a system meet or exceed these safety standards:
APTA Normal Lighting Standard RP-E-012-99
GM/RC2531 – Recommendations for Rail Vehicle Emergency Lighting
FRA 49 CFR Parts 238 and 239 “Passenger Train Emergency Systems II; Final Rule”
EN 13272 Railway Applications – Electrical Lighting for Rolling Stock in Public Transportation Systems
APTA Emergency Lighting Standard SS-E-013-99 Rev 1
APTA Insulation Integrity Standard SS-E-001-98
APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
IEEE SA – 1558-2004 Standard for Software Documentation for Rail Equipment and Systems
LED Spotlights
Commuter Rail, InteriorLED fixtures provide superior light levels, power savings and reliability over traditional incandescent bulbs.
We offer:
- 20-95vdc & 50 – 130vdc operating range from the DC power supply through TDG’s Universal Driver
- AC Versions available (110 – 220 VAC)
- Several options for lenses
- A variety of flange and bezel finishes
- Reverse polarity and transient spike protection
- 100,000-hr minimum continuous operation
All fixtures as a system meet or exceed these safety standards:
- APTA Normal Lighting Standard RP-E-012-99
- APTA Emergency Lighting Standard SS-E-013-99 Rev 1
- APTA Insulation Integrity Standard SS-E-001-98
- APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
- NFPA 130:2010 Flame Smoke and Toxicity Standard
Passive HPPL LLEPM Flooring System
Commuter Rail, InteriorThis passive high performance photoluminescent (HPPL) low location exit pathway marking (LLEPM) flooring system is fully repairable.
We supply:
- Rigid polycarbonate-based HPPL material
- A scuff-resistant surface
- Availability in 60-foot continuous lengths
- A mounting track offered in aluminum or color-matched polycarbonate
- 24-month warranty
The flooring system meets or exceeds these standards:
- APTA Standard for Low Location Exit Pathway Marking SS-PS-004-99 Rev 2
- NFPA 130:2010 Flame Smoke and Toxicity Standards for Rail