Heavy Rail Exterior Lighting

Home Page > Heavy Rail > Heavy Rail Exterior Lighting

  • + Quick View

    Track Lights

    ,

    Track lights on light rail vehicles (LRVs) illuminate the tracks directly in front.

    We offer:

    • Ruggedized polycarbonate lens (NFPA 130 compliant for flame, smoke, and toxicity requirements) which stands up to harsh traffic environments and daily car washes
    • An internal LED mounting angle incorporated to eliminate blinding of oncoming drivers or pedestrians
    • Custom sealed designs available
    • A focused tight beam which illuminates tracks and switch points up to 50 feet in front of a light rail vehicle (LRV).
    • Delphi Weather Pack connector as well as other sealed connectors upon request
    • Availability as a drop-in replacement for standard round sealed beam lights
    • Reverse polarity and transient spike protection
    • 100,000-hr minimum continuous operation for an LED system
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed these standards:

    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards
  • + Quick View

    LED Headlights

    ,

    Long-lasting LED components designed to withstand shock & vibration to provide years of maintenance-free service;
    Designed by JW Speaker

    PAR 56 7″ Round 75V LED Locomotive Headlight/Auxiliary Light
    View Spec Sheet

    PAR 46 5.75″ LED Headlight
    View Spec Sheet

    PAR 56 7″ Round 8700-EV-12/24V Dot Headlamp w/H4 Black
    View Spec Sheet

    4″ x 6″ Rectangular LED 8800 12/24V Dot Hi/Lo LRV Headlamp
    View Spec Sheet

    5″ x 7″ Rectangular LED 8900 12/24V LED Dot Headlamp
    View Spec Sheet

  • + Quick View

    Platform Lights

    ,

    These high-powered white LEDs provide bright illumination to platforms, walkways or ladder rungs without harsh glare to passing trains.

    We supply:

    • Ruggedized polycarbonate lens (NFPA 130 compliant)
    • 20-90vdc & 50 – 130vdc operating range from the DC power supply through TDG’s Universal Driver
    • Robust machined and sealed aluminum housing ready for painting or anodizing to natural or black
    • Reverse polarity and transient spike protection
    • 100,000-hr minimum continuous operation for an LED system
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed these standards:

    • APTA Insulation Integrity Standard SS-E-001-98
    • 49CFR Part 38.81
    • EN 13272
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards
  • + Quick View

    End Door Lighting

    ,

    LED fixtures provide superior light levels, power savings and reliability over traditional incandescent bulbs.

    We offer:

    • 20-95vdc operating range from the DC power supply through TDG’s Universal Driver
    • Several options for lenses
    • A variety of flange and bezel finishes
    • Reverse polarity and transient spike protection
    • 100,000-hr minimum continuous operation for an LED system
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed these standards:

    • APTA Normal Lighting Standard RP-E-012-99
    • APTA Emergency Lighting Standard SS-E-013-99 Rev 1
    • EN 13272
    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards
  • + Quick View

    LED Marker and Break Lights

    ,

    LED fixtures provide superior longevity, light levels, power savings and reliability over traditional incandescent bulbs.

    We offer:

    • Wide operating ranges provided by superior TDG constant current LED drivers such as 10-45vdc
    • Many existing lens shapes and colour options
    • Custom designs
    • A variety of flange and bezel finishes
    • Retrofit mounting bases for when the original bezel is no longer available, or will work with a retrofit installation
    • SAE/FMVSS/CMVSS 108 compliance
    • Sealed housings and also sealed connector solutions
    • Reverse polarity and transient spike protection
    • 100,000-hr minimum continuous operation for an LED system
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed these standards:

    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards
  • + Quick View

    Number Board Lighting

    ,

    Install new LED fixtures or versions to install replacement LED inserts into any existing incandescent or fluorescent enclosures.

    We offer:

    • 20-95vdc operating range from the DC power supply through TDG’s Universal Driver
    • Simple terminal block connections or cable assembly connections
    • Reverse polarity and transient spike protection
    • 100,000-hr minimum continuous operation for an LED system
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed these standards:

    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards
  • + Quick View

    Marker Lights

    ,

    LED fixtures provide superior longevity, light levels, power savings and reliability over traditional incandescent bulbs.

    We offer:

    • Wide operating ranges provided by superior TDG constant current LED drivers such as 10-45vdc
    • Many existing lens shapes and colour options
    • Custom designs
    • A variety of flange and bezel finishes
    • Retrofit mounting bases for when the original bezel is no longer available, or will work with a retrofit installation
    • SAE/FMVSS/CMVSS 108 compliance
    • Sealed housings and also sealed connector solutions
    • Reverse polarity and transient spike protection
    • 100,000-hr minimum continuous operation for an LED system
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed these standards:

    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards
  • + Quick View

    Side Indicator Lighting

    ,

    LED side indicator lights come in a variety of styles and position numbers.

    We offer:

    • A light rail version visible to a distance of ¼ mile which accommodates long train sets
    • Delphi Weather Pack connector as well as other sealed connectors upon request
    • Modular versions intended for adjacent custom configuration placements
    • Ruggedized machined solid aluminum housing ready for painting or for anodizing to natural or black
    • Standardized LED internal drivers and LED modules that enable final housing configurations to be easily customized
    • Ability for maintenance to be done from exterior or interior of the vehicle
    • Optional flush lens for improved cleaning of the lens surface during car washing
    • Reverse polarity and transient spike protection
    • 100,000-hr minimum continuous operation for an LED system
    • 24-month warranty on LED fixtures

    All fixtures as a system meet or exceed these standards:

    • APTA Insulation Integrity Standard SS-E-001-98
    • APTA Attachment Strength Standard SS-C&S-006-98 Rev 1
    • NFPA 130:2010 Flame Smoke and Toxicity Standards